The IC670GBI001 isa communication module from the Field Control series of GE Fanuc. This module specifically supports Genius Bus protocol, allowing users to implement distributed I/O architecture. This module is coupled with a Genius Bus Interface Unit terminal block to enable mounting DIN rail or Panel mounting. This terminal block module also hosts the screw terminals where main genius bus connection and optional redundancy network connectivity can be established.
The IC670GBI001 supports daisy-chain topology architecture on both the primary and secondary bus. The supported data transmission speed of this module are 153.6 Kbaud standard, 153.6 Kbaud extended, 76.8 Kbaud, or 38.4 Kbaud with available memory allocations for a variety of data types such as 256 Bytes for discrete inputs (%I), status data and intelligent modules; 256 Bytes for discrete outputs (%Q) and fault clearing for intelligent modules; 256 bytes for analog inputs (%AI) and 256 bytes for analog outputs (%AQ). Both the primary and secondary bus connection points are provided with terminating resistor connection points that is used to terminate the bus connection and maintain a stable connection across the network. This termination point is specifically allocated across the serial 1 and serial 2 terminals, installed at the start (first node) and end of the bus (last node). Resistor values include 75 ohm, 100 ohm, 120 ohm or 150 ohm terminating resistor. Pre-molded bus cables may also be used with this Bus Interface module with catalog number IC660BLM508 which uses 75 ohm resistor and IC660BLM506 which uses 150 ohm resistor.
The IC670GBI102 bus interface unit is a Field Control bus interface unit manufactured by GE Fanuc. The unit is part of the GE Field Control series and it is compatible with the IC670GB and IC670GBI modules. This programmable control module operates within a temperature range of 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit) and it has a storage temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The relative humidity range of the IC670GBI102 bus interface module is 5 to 95% (non-condensing). The IC670GBI102 bus interface unit can withstand a solid vibration and shock levels that are typical for industrial environments and it is installed on panel-mounted DIN rail.
The IC670GBI102 bus interface unit can operate on both AC and DC power sources and the operating voltage range is 90 to 135 Volts AC and 105 to 150 Volts DC. The nominal rated voltage of the IC670GBI102 bus interface unit is 115 Volts AC and 125 Volts DC. The power consumption is a maximum of 48 Volt-Amps at 115 Volts AC and a maximum of 24 Watts at 125 Volts AC. The power consumption is specified for operation on a full load. The inrush current of the unit is 20 Amps at peak for a maximum of 3 milliseconds. The maximum holdup time of the unit is 20 milliseconds while the power supply output voltage is 6.5 Volts DC. The input frequency of the unit is 47 to 63 Hertz. The terminal block of the bus interface unit is 16 milliamps and its reliability rating is more than 600,000 hours.
Technical Specifications
| Brand | GE Fanuc |
| Series | Field Control |
| Manufacturer: | GE Fanuc |
| Manufacturer | GE Fanuc |
| Product Type: | Profibus Bus Interface |
| Part Number | IC670GBI102 |
| Series | Field I/O control |
| Product Family | Field Control |
| Type | Bus interface unit |
| Part Number | IC670GBI102 |
| Compatibility | Field control IC670GB / IC670GBI |
| Part Number: | IC670GBI102 |
| Product Description | Bus Interface Unit (BUI) |
| Nominal Rated Voltage | 115 Volts AC, 125 Volts DC |
| Transmission speed | 53.6 Kbaud standard, 153.6 Kbaud extended, 76.8 Kbaud, or 38.4 Kbaud |
| Supply Voltage range | 90 to 135 VAC, 105 to 150 VDC |
| Nominal supply voltage | 115 VAC, 125 VDC |
| Terminating resistors | 75 ohm, 100 ohm, 120 ohm, 150 ohm resistor |
| Voltage Range | 90 to 135 Volts AC / 105 to 150 Volts DC |
| Power consumption | 115 VAC: 48VA maximum at full load (nominal voltage) 25 VAC: 24W maximum at full load (nominal voltage) |
| Pre-fabricated cables | IC660BLM506, IC660BLM508 |
| Frequency | 47 to 63 Hertz |
| Hot insertion and removal of modules | IC670GBI002(F); IC670GBI102A |
| Inrush Current | 15-50 Amps peak, 3 mS maximum |
| Power at 115 Volts AC | 48 Volt-Amps (maximum) at full load |
| Reliability | More than 183,000 hours operation MTBF, calculated |
| Power Supply Output | 6.5 VDC ±5% |
| Power at 125 Volts AC | 24 Watts (maximum) at full load |
| Mounting | DIN Rail / Panel mount via the Profibus Bus Interface Unit (BIU) terminal block |
| Current output to modules | 2:00 AM |
| Inrush Current | 20 Amps (peak), 3 milliseconds (maximum) |
| Holdup time | 10 ms |
| Power Supply Output | 6.5 Volts DC |
| No. of supported I/O modules | up to Eight (8) modules |
| Supported protocols | Genius |
| Holdup Time | 20 milliseconds (maximum) |
| Compatible Hand-Held Programmers | IC660HHM501; IC693PRG300 |
| Reliability | More than 183,000 hours operation MTBF |
| Supported functions | I/O forcing; Diagnostic display; Program upload/download |
| Product Lifecycle Status | Discontinued/Obsolete |
| Power supply: | 24 VDC |
| CPU Redundancy | Supported |
| Hot Insertion and Removal of Modules | Supported |
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
Order Process:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
3, We can according to your shipment to ship out the goods, Or we also can help you to ship out the goods directly. And the tracking number will send you by the next day.
4., Usually for our inventory goods only need to take about 3-5 days.
5. If you also have any questions, you can ask me any time, right below is my contact.
FAQ
* Q: Do you provide a warranty for the goods?
A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any problem, please contact with us, we'll provide a suggestion from our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
